Installation Guide

Clearance Dimensions (Wood/Composite Overlay)
9
The bottom of a standard hood should be 30”
(76.2 cm) min. to 36” (91.4 cm) max. above the
countertop. This would typically result in the
bottom of the hood being
66” (167.6 cm) to 72” (182.9 cm) above the floor.
Refer to the range hood installation instructions
for additional information. These dimensions
provide for safe and efficient operation of the
hood.
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
24”
(61.0 cm)
or
27”
(38.6 cm)
30”
(76.2 cm)
6”
(15.2 cm)
Wood/Composite
Overlay
Wood/Composite
Overlay
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
0”
(
0 cm)
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
Wall Installation
Island Installation
Important: This range ships with an island
trim. There must be a minimum of 6” (15.2 cm)
clearance from rear of range to a combustible
wall.
Note: Minimum clearance for back wall is 0”
with backguard or high-shelf.
Note: Clearances from non-combustible
materials are not part of the ANSI Z21.1 scope
and are not certified by CSA. Clearances to non-
combustible materials must be approved by the
authority having jurisdiction.