Installation Instructions

10
7
Slide cavity assembly into the cabinet opening.
8
x4
9
Secure the warming drawer using four
#8 mounting screws (four screws provided).
Replace drawer assembly.
Installation (cont.)
Final Preparation
• All stainless steel body parts should be wiped
with hot, soapy water and with a liquid
cleaner designed for this material.
If buildup occurs, DO NOT use steel wool,
abrasive cloths, cleansers, or powders!
If it is necessary to scrape stainless steel
to remove encrusted materials, soak with hot,
wet cloths to loosen the material, then use a
wool or nylon scraper. DO NOT use a metal
knife, spatula, or any other material tool to
scrape stainless steel! Scratches are almost
impossible to remove.