Installation Guide

10 EN
Refrigerator / User Manual
Installation
Water filter
Your refrigerator is equipped with an internal filter. To
install the water filter, follow the instructions below
referring to the figures supplied:
Installing the water filter
Filter replacement consists of 2 parts - physically
changing the filter and making adjustments on the
display.
1. Press “Ice Off”
button (located under the SET
button) before removing the by pass cover.
2. Slide the water filter cover forward.
3. Remove the water filter bypass plug by pulling downwards
and pulling out.
4. Seat the water filter cover into the mechanism and push
forwards to lock it in place.
5. Press
“Ice Off” button on the display again to exit this
mode.
WARNING: Ensure that the Ice Off mode
is enabled before removing the by-pass
cover.
It is normal that a few drops of water drip
after the cover has been removed.
WARNING: Water filter cleans some
foreign particles in the water. It does not
purify water from microorganisms.
Filter end of life warning.
Water filter must be replaced every 6
months. Make sure that the "Ice Off" mode
is enabled before removing the filter.