Installation Guide

9 EN
Refrigerator / User Manual
Installation
Before Installation
Make sure that you have everything necessary to ensure
proper installation before proceeding, including: M17
wrench, 3 mm allen key, screw driver.
Your product comes with an internal water filter for use
inside the refrigerator. Part number of the filter is
RWFRVFFR and you can use this part number when
ordering replacement filters
.
Normally, you are not required to tighten
the union with a tool. However, you can
use a pliers or pliers to tighten the union if
there is a leak. DO NOT overtighten
Connecting the water line
to the water supply
Connect the water line to a water supply valve. If a valve
is not present or you are not sure, consult a qualified
plumber.
Connecting the water line
to the refrigerator
1. Remove the valve channel cover (A) from the water inlet
valve.
2. Slip the union (C) water inlet valve (B).
3. Push the water hose downwards firmly to slip it onto the
water inlet valve (B).
4. Tighten the union (C) by hand to secure it onto the water
inlet valve.