Installation Instructions

17
3
4
5
6
Electrical Connection
4-Wire (con’t)
1
1
7
8
Remove grounding screw. Cut-off and discard
ground strap.
Feed supply cord up through hole in bottom of
range back.
Attach ground lead (green) with ground screw that
was removed.
Attach line #1 (red) and line #2 (black) leads to
outside terminal. Attach neutral wire (white) to
center terminal on terminal block.
Push supply cord toward terminal block to relieve
strain, reattach supply cord strain relief bracket over
supply cord.
Reattach access door.