Use and Care / Installation Manual

4
8. If desired, snap toe kick
included with each unit to
front legs. (See illustration
#6).
Illustration #6
Illustration #7
Snap toe kick to front
legs
9.
S
IDE PANEL INSTALLATION (End of Run Only)
•Remove all drawers. (If applicable)
•Remove all protective covering from panel and install using the #10 x 1/2” tek screws provided. (See
Illustration #7)
•Attach toe kick to legs (See Illustration #6).
N
OTE:
FOR WALL INSTALLATIONS:
The front portion of the side toe kick must be shortened to match the front toe kick. (See Illustration #7).
The plastic material can be cut with any common type wood saw blade.
F
OR ISLAND INSTALLATIONS:
The side, front, and rear toe kick must be modified (See Illustration #7)
2. Attach from inside (front and rear)
1. Place side panel into area of
the cabinet
Side toe kick (B)Front toe kick (A)
LH Side Panel Installation
(RH installs the same way)
Toe Kick Dimensions
Wall Installation Island Installation
Front Toe Kick (A) 16 3/4” (42.5 cm) 16 3/4” (42.5 cm)
Side Toe Kick (B) 27 1/4” (61.6 cm) 25 1/2” (64.8 cm)
Rear Toe Kick (C) N/A 16 3/4” (42.5 cm)