Installation Instructions

25
Verify Operations
Control Panels
Bottom Freezer
1. Press “ACTIVATE CONTROLS” pad.
2. Verify unit is not in Sabbath Mode.
If in Sabbath Mode:
A. The Sabbath Mode will disable the interior lights, display (except SAB indicator,
temperature and compartment indicator) and alarm.
To exit the Sabbath Mode:
B. Press and hold “ACTIVATE CONTROLS” and then “DISPLAY OFF” for 3 seconds.
(The control will beep three times to alert the user the Sabbath Mode has been exited.)
3. Verify unit is not in Showroom Mode.
If in Showroom Mode:
A. The Showroom Mode will disable the refrigerator system but all other functions are
normal. These include lights and control. (If the refrigerator is in Showroom Mode,
SHOW will be lit.)
To exit Showroom Mode:
B. Press and hold “ACTIVATE CONTROLS”; while holding, press and hold “HIGHER”
and “ALARM OFF” together. (The control will beep three times to alert the user that
Showroom Mode has been exited.)
4. Press “ACTIVATE CONTROLS” then press and hold “LOWER”; while holding, press and
hold “DISPLAY OFF” and hold until beeps (force start compressor).
5. All models need to be set at 38° F and 0° F for the refrigerator and freezer respectfully -
factory setting.
ACTIVATE
ACTIVATE
CONTROLS
CONTROLS
FRZ
FRZ
TEMP
TEMP
REF
REF
TEMP
TEMP
HIGHER
HIGHER
LOWER
LOWER
FAST
FAST
COOL
COOL
MAX
MAX
REF
REF
MAX
MAX
FRZ
FRZ
ALARM
ALARM
OFF
OFF
DISPLAY
DISPLAY
OFF
OFF
FREEZER
FREEZER
MAX FRZ
MAX FRZ
MAX REF
MAX REF
F
FAST COOL
FAST COOL
SAB SHOW
SAB SHOW
REFRIGERATOR
REFRIGERATOR
DOOR OPEN
DOOR OPEN
POWER
POWER
HIGH TEMP
HIGH TEMP
C