Installation Guide Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-(845-4641) or visit the our web site at vikingrange.com in the US or Built-In Refrigeration Top Grille Installation (Dual Installation) brigade.
Grille Kit Components NOTE: These instructions include information on how to remove the current grilles and re-install the grille kits. For information on dimensions, specifications and refrigerator installation, please refer to the Installation Guides included with the refrigerators. 1. 2. 3. 4. 5. Grille Removal 2 1 Grille Assembly (1) "Z" shaped side trim (1) "J" shaped center trim (1) Side trim screws (12) Center trim screws (8) Pull the center grille louver up at an angle and pull out.
Side Trim Installation • Professional Models Remove cabinet side trim mounted on the left hand side of the refrigerator to be installed on the right side of the installation. Replace with the “Z” shaped side trim provided in the grille kit using the 12 screws included with the grille kit. Side Trim Installation - Professional Models • Engage the right hand refrigerator’s left side trim into the “J” shaped portion of the left side refrigerator’s right side trim.
Side Trim Installation - Custom Panel Models • Remove cabinet side trim mounted on the left hand side of the refrigerator to be installed on the right side of the installation. Replace with the “Z” shaped side trim provided in the grille kit using the 12 screws included with the grille kit. • Remove cabinet side trim mounted on the right side of the refrigerator to be installed on the left side of the installation.
Grille Assembly Bracket Placement - Grille Assembly Install - Professional Models Professional Models For 66” grille, excluding Custom Panel, Add/Remove brackets to full length grille as required. See illustration below. • Remove center grille blade by lifting up and pulling forward. • Insert grille into refrigerators. Screw grille assembly into units with (4) screws removed in Step 3 (See Grille Removal Section). 66” Grille (back view) Use this bracket if 36” W.
Grille Assembly - Grille Assembly Bracket Placement - Custom Panel Models Custom Panel Models On Custom Panel models, grill spacers from original unit grilles must be reused: • Remove grille brackets from grille included in the grille kit by removing 4 screws on each grille bracket located on the back of the grille assembly. • Remove grille brackets and spacers from original unit grilles by removing 4 screws on each grille bracket located on the back of each grille assembly.
Grille Assembly Install Custom Panel Models • Remove center grille blade by lifting up and pulling forward. • Insert grille into refrigerators. Screw grille assembly into units with (4) screws removed in Step 3 (See Grille Removal Section).
14 15
