Installation Instructions

37
9
3”3”3”
10a
Plug in power cord to verify operation.
Note: Make sure power switch and showroom switch are
in the “On” Position.
Place unit within 3” of being flush with cabinets.
Note: To avoid cabinet damage, place cardboard between
cabinets and unit. When moving unit, do not crimp, kink
or crush water supply line.
10b
11
Carefully move unit until semi flush with cabinet
(depending on unit).
Pull supply tubing forward under unit.
Note: DO NOT use plastic water lines.
12
13
Flush water line by running two quarts of water
into a bucket. Turn water off.
Connect supply tube to water valve using
a 1/2” wrench. Note: DO NOT overtighten.