installation guide

31
CAUTION: Secure vent hood. Make sure mounting screws
are secured into framing. Use additional mounting screws
and wall anchors, if necessary.
7
5/16”
Nut driver
5
Remove electrical box cover.
1
6
2
Flip hood over. Insert 6” of electrical wiring through the
top of vent hood and secure. Refer to local codes.
3
4
Attach with screws and lock washers provided.
Attach with screws.
WARNING
To reduce the risk of fire, electric shock, or injury to
persons, observe the following:
• Use this unit only in the manner intended by the
manufacturer. If you have any questions, contact the
manufacturer.
• Before servicing or cleaning unit, switch power off at
service panel and lock service panel to prevent power
from being switched on accidentally. When the
service disconnecting means cannot be locked,
securely fasten a prominent warning device, such as
a tag, to the service panel.
Installation
(VWH/CVWH 10”H./12”H. Wall Hoods w/Recirculating Kit)