Installation Sheet

22
23
Custom Wood Facing Dimensions
Each wine rack has a wood facing which can be removed. The facings can be stained, painted,
or removed and replaced with alternative wood facings. Note: A scrap sample should be
tested in the unit before attaching permanent changes to your wine cellar fronts. Some
paints and/or stains can cause undesirable odors.
Remove the wood facing by removing the four 1/4” (0.6 cm) hex head screws located on the
inner edge of the wine rack. Remove the wood facing. Follow the dimensions below to cut
wood facing out of alternative woods.
Back of
facing
23-7/8”
(60.6 cm)
(4X) 3/32”
(0.1 cm) dia.
1/2”
(1.27 cm) deep
1-15/16”
(4.9 cm)
1-7/16”
(3.7 cm)
6-11/16”
(17.0 cm)
(2X) 45°x 1/8”
(0.3 cm)
(3X) R1/8”
(0.3 cm)
1-7/16”
(3.7 cm)
1/8”
(0.3 cm)
1/32”
(0.03 cm)
31/32”
(2.5 cm)
1/8”
(0.3 cm)
1/4”
(0.6 cm)
SIDE VIEW
SHORT FACING
(TOP TWO ZONES)
Custom Wood Facing Dimensions
Back of
facing
(2X) R1/2”
(1.3 cm)
3-5/16”
(8.4 cm)
1-15/16”
(4.9 cm)
6-11/16”
(17.0 cm)
23-7/8”
(60.6 cm)
(4X) 3/32”
(0.1 cm) dia.
1/2”
(1.27 cm) deep
11/16”
(1.7 cm)
3-15/16”
(10.0 cm)
1/4”
(0.6 cm)
1/8”
(0.3 cm)
1/32”
(0.03 cm)
31/32”
(2.5 cm)
1/8”
(0.3 cm)
(2X) 45°x 1/8”
(0.3 cm)
SIDE VIEW
TALL FACING
(LOWER ZONES)