Installation Sheet

8
Cutout Dimensions (Professional/Custom)
9
29-5/8” (75.2 cm) Standard Mount
30” (76.2 cm) Flush Mount Only
82-7/8” (210.5 cm) min.
anti-tip board and opening
height
84-1/16” (213.5 cm) max.
anti-tip board and opening
height
Electrical
outlet
location
Anti-tip mounting
brackets attached
to wall studs
24” (61.0 cm) Professional
25” (63.5 cm) Custom Panel*
73-3/4”
(187.3 cm)
4”
(10.2 cm)
8-1/4”
(20.9 cm)
3-1/2”
(8.9 cm)
1-1/2”
1-1/2”
(3.8 cm)
(3.8 cm)
1-1/2”
(3.8 cm)
*Custom Panel models fit flush in 25”
(63.5 cm) deep cabinet openings.
They can be installed in standard 24”
(61.0 cm) deep openings. The door
faces and top grille will protrude 3/4”
(1.9 cm) into the room.
2” x 4” Mounting Board [1-1/2” (3.8 cm) x 3-1/2” (8.9 cm)]
Attached to anti-tip mounting bracket
Note: If unit is installed deeper than 24” (61.0 cm), then
shim behind anti-tip bracket thickness by the same amount
to
Cabinet Information (Professional)
Professional models fit “semi-flush” in standard 24” (61.0 cm) deep cabinet openings. The door
face protrudes 2-1/16” (5.2 cm) from the cabinet face. The handle protrudes an additional 2-1/2”
(6.4 cm) into the room.
Door
Wall
1-13/16”
(4.6 cm)
3/4”
(1.9 cm)
full end
panel
24”
(61.0 cm)
standard
cabinet
depth
5/16”
(0.8 cm)
2-1/16”
(5.2 cm)
offset
TOP VIEW