Installation Instructions

2
VENTILATOR KIT INSTALLATION
Model VINV600 Ventilator Kit
1. Attach the GUARD with (3) M4 x 0.7 screws provided.
2. Choose the correct VENTILATOR MOUNTING PLATE for your hood series.
(VBCV53638 and VBCV54238 will only be shipped with the 050722-000 mounting
plate.)
3. Attach DAMPER to ventilator mounting plate, as shown. Use three (3) HEX
SCREWS. Note: Damper FLANGE to be captured by screw heads.
4. Apply (4) NEOPRENE WASHERS (supplied) to each of the mounting plate STUDS.
5. Attach BLOWER to MOUNTING PLATE with (4) 10-24 HEX NUTS.
6. Attach blower / mounting plate assembly to the hood's (4) THREADED STUDS with
(4) 10-24 HEX NUTS.
7. Plug blower’s POWER CORD into RECEPTACLE inside the hood.
8. Wrap wires with wire tie (provided).
Ventilator configuration using
mounting plate 020971-000
MOUNTING
PLATE
TOP OF HOOD
THREADED
STUDS
DAMPER
HEX
SCREWS
FLANGE
RECEPTACLE
HEX NUTS
POWER
CORD
BLOWER
NEOPRENE
WASHERS
Ventilator configuration using
mounting plate 020972-000 or
050722-000
MOUNTING
PLATE
TOP OF HOOD
THREADED
STUDS
DAMPER
HEX
SCREWS
FLANGE
RECEPTACLE
HEX
NUTS
POWER
CORD
BLOWER
NEOPRENE
WASHERS
STUDS
STUDS
GUARD
MOUNTING
PLATE
TOP OF HOOD
THREADED
STUDS
DAMPER
HEX
SCREWS
FLANGE
RECEPTACLE
POWER
CORD
BLOWER
NEOPRENE
WASHERS
STUDS
Ventilator configuration using
mounting plate 020970-000
HEX NUTS