VDVE900 - 900 CFM Interior Power Ventilator - Installation Instructions

99045284B

VIKING RANGE, LLC GREENWOOD,

MISSISSIPPI 38930 USA

USE AND CARE

Disconnect electrical power supply and lock out

service panel before cleaning or servicing this unit.

CLEANING

Remove cover and carefully vacuum blower and in-

side of housing. Be careful not to bend or otherwise

damage blower wheel.

MOTOR LUBRICATION

The motor is permanently lubricated. Do not oil or

disassemble motor.

CONNECT 10" ROUND DUCTWORK

2. Refer to downdraft ventilator manual for

instructions on how to:

Locate and cut holes in cabinet.

Attach 10" round duct and rough-in plate to

downdraft.

1. Connect 10" round ductwork to blower. Run ductwork

to downdraft location.

NOTE: Use duct tape to make ductwork connections secure

and air tight.