Installation Guide Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641.
Removing Existing Trim Removing Existing Trim Remove the existing side trim pieces from the oven. There should be one trim piece on each side of the oven. For Professional ovens, there will be a trim piece at the top and bottom of the oven that will need to be removed. Also, on the Professional ovens, the door will need to be removed prior to removing the lower vent trim and putting on the new trim. Double Oven NOTE: Keep the screws that are left after removing the existing side trim pieces.
Installing Flush Mount Trim Installing Flush Mount Trim After removing the existing side pieces, install the flush mount trim pieces to the oven. 1. Remove the protective plastic from the flush mount trim pieces. 2. Install the two flush mount trim pieces to the oven (see diagram). 3. For Professional ovens, install the top and bottom trim pieces (see diagram). Double Oven NOTE: Only Professional model ovens will require a top and bottom flush mount trim piece.
6 7
