Installation Instructions

8
Surface Burner Flame Adjustment
1. Turn the top burner knob to any location within the low/simmer setting.
2. Insert a narrow, fl athead screwdriver into the hollow shaft of the surface burner valve, and engage the slotted fl ame
adjustment screw. The fl ame should be a small fl ame that comes just to the top edge of the burner. Rotate the
adjusting screw clockwise no more than 5 turns to lower the fl ame or counter clockwise to increase the fl ame. Turning
the adjusting screw more than 5 turns can result in the screw being completely removed and causing a gas leak. Turn
the burner off and relight several times, turning to any location within the low/simmer position. The fl ame should light
at every port each time. Readjust as needed.
Flathead screwdriverSurface burner valve
(behind control knob)
Flame adjustment
screw