Installation Instructions

3
Installation (Side Trim)
Place the countertop side trim template against the side of the range or rangetop. The fl ange of the template should
be wrapped around the back of the unit. The top of the template should be even with the top edge of the outer trim.
Mark the holes and remove template. Using a 9/64” drill bit, drill the three designated holes into the side of the range or
rangetop. Place the countertop side trim into place and secure with the provided screws.
For Models:
P24CSTSS - 24” D. 5 Series VGCC/VGSC/VDSC/VESC/VISC Ranges and VGRT Rangetops
24” D. RDSCG/RDSCD/RDSCE D3 Ranges
RD24CSTSS - 24” D. 3 Series RVGR/RVDR/RVER Ranges