36"W./10"H. Backguard - BG10736 - Installation Instructions

6
Curb Base Accessories
CUSTOM CURB BASE FRONT
1. Remove the standard curb base front assembly from the carton.
2. Remove the front (A) from the mounting assembly (B).
3. Attach locally supplied front (C) to the mounting assembly (B) and simply clip onto the front range legs.
Important Note: The locally supplied front must not be any taller than 3-1/8” (7.9 cm) tall. Fronts taller than 3-1/8” (7.9
cm) could obstruct the airfl ow.
4. The assembly is adjustable about 2” (5.1 cm) front to back so that alignment with the cabinet toe front is possible.
Loosen bracket bolts on each side, but allow snug fi t. Clip assembly onto range legs; determine front to back setting;
remove, tighten bolts, and reattach.
Important Note: The range must be installed as specifi ed in the range installation guide for proper airfl ow when using
the custom curb base.
B
C