Installation Manual

Enclosure Preparation

T20

• Adjust the front foot level with the

adjusting wrench to balance and raise the

dishwasher to the enclosure height.

• Adjust the rear foot level with a

screwdriver to balance and raise the

dishwasher to the enclosure height.

NOTICE

• Make sure the dishwasher is plumb

and notice dishwasher can be placed

with a small clearance under the

counter top.

• Turning the screwdriver in the

direction of the black arrows will

bring the dishwasher back feet up.

• Turning the screwdriver in the

direction of the white arrows will take

the dishwasher rear feet down.

Installing the

Side Trim Strips

• Remove the

adhesive tape

(Figure A).

• Place the trim

strips on the front

edge of the side

walls (Figure B).

NOTICE

Make sure you use the correct trim strip since there is a left and a right side strip. The

flexible material should be facing forward (Figure B).