Installation

4
IMPORTANT – Please Read and Follow!
WARNING
BURN HAZARD
The use of cabinets for storage
above the appliance may result
in potential burn hazard. Combustible items
may ignite, metallic items may become
hot and cause burns. If a cabinet storage
is to provided the risk can be reduced
by installing a range hood that projects
horizontally a minimum of 5" (12.7 cm)
beyond the bottom of the cabinets.
WARNING
ELECTRICAL
GROUNDING
INSTRUCTIONS
This cooktop must be electrically
grounded in accordance with local codes
or, in the absence of codes, with the
National Electrical Code, ANSI/NFPA 70-
latest edition. FOR PERSONAL SAFETY,
THIS APPLIANCE MUST BE PROPERLY
GROUNDED.
WARNING
The electrical power to the
unit must be shut off while line
connections are being made.
Failure to do so could result in serious
injury or death.
WARNING
FIRE AND ELECTRICAL
SHOCK HAZARD
DO NOT use an extension
cord with this appliance. Such
use may result in fi re, electrical
shock, or other personal injury.
CAUTION
Be sure the electric power is
off from the breaker box to the
junction box until the cooktop
is installed and ready to operate. The
junction box should be connected to a
suitable ground.
WARNING
Stationary appliances not fi tted with
means for disconnection from the supply
mains having a contact separation in all
poles that provide full disconnection under
overvoltage category III, the insrtuctions
shall state that means for disconnection
must be incorporated in the fi xed wiring in
accordance with the wiring rules.
WARNING
The required overcurrent protection for
UL is not stated in the instructions. Ref.
UL858: 21.1.
Please note: The power supply board
is provided with the power supply, type
RAC03-24SC/277, manufactured by
Recom, rated Input 100-277Vac, Output
24V/125mA is UL recognized under
QAQGQ2/8.E224736. The external
overcurrent protection of the primary for
this power supply is max.20A.