installation
2
Warnings & Important Safety Instructions _____________________________________________________2
Dimensions ______________________________________________________________________________4
Specifications ____________________________________________________________________________5
Clearance Dimensions (Proximity to Cabinets) __________________________________________________6
Clearance Dimensions (Wood/Composite Overlay) ______________________________________________7
Electrical Requirements ____________________________________________________________________8
General Information _______________________________________________________________________9
Installation______________________________________________________________________________10
Door Removal ____________________________________________________________________10
Leg Installation ___________________________________________________________________10
Electrical Connection (3-wire) _______________________________________________________11
Electrical Connection (4-wire) _______________________________________________________12
Leveling/Adjustments/Alignment ____________________________________________________13
Anti-tip Device Installation __________________________________________________________14
Final Installation __________________________________________________________________16
Door Replacement and Adjustment __________________________________________________16
Performance Checklist ____________________________________________________________________17
Final Preparation_________________________________________________________________________18
Service & Registration_____________________________________________________________________18
• Before beginning, please read these instructions completely and carefully.
• Do not remove permanently affixed labels, warnings, or plates from product. This may void the warranty.
• All local and national codes and ordinances must be observed. Installation must conform with local codes or in
the absence of codes, the National Fuel Gas Code ANSIZ223.1/NFPA-54 –latest edition.
• The installer must leave these instructions with the consumer who should retain for local inspector’s use and for
future reference.
In Canada: Installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or
local codes.
Table of Contents
Important
–Read and Follow!