installation

7
The bottom of a standard hood should be 30” (76.2 cm)
min. to 36” (91.4 cm) max. above the countertop. This
would typically result in the bottom of the hood being
66” (167.6 cm) to 72” (182.9 cm) above the floor. Refer to
the range hood installation instructions for additional
information. These dimensions provide for safe and
efficient operation of the hood.
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
66”min.
(167.6 cm)
to
72”max.
(182.9 cm)
24”
(61.0 cm)
or
27”
(38.6 cm)
30”
(76.2 cm)
6”
(15.2 cm)
Wood/Composite
Overlay
Wood/Composite
Overlay
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
0”
(
0 cm)
30”min.
(76.2 cm)
to
36”max.
(91.4 cm)
Wall Installation
Island Installation
Note: Minimum clearance for back wall is 0”
with backguard or high-shelf.
Important: This range comes standard with an
Island Trim. There must be a minimum of 6”
(15.2 cm) clearance from rear of range to a
combustible wall. Clearances from non-
combustible materials are not part of the ANSI
Z21.1 scope and are not certified by CSA.
Clearances to non-combustible materials must
be approved by the authority having
jurisdiction.
Clearance Dimensions (Wood/Composite Overlay)