Installation Guide Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 LPKPDR - Universal LP Conversion Kit for Professional & Designer Ranges/Rangetops F20525E EN (041414)
IMPORTANT–Please Read and Follow! Table of Contents Warnings __________________________________________________________________ Kit Contents _______________________________________________________________ Regulator Conversion ________________________________________________ Infrared Broiler Conversion ____________________________________________ Surface Burner Conversion 3 4 5 6 Sealed Type 1 ____________________________________________________ 7 Sealed Type 2 ____________________________________________
LP Orifice Conversion Kit Contents Burner Type Size Quantity Infrared Broiler Sealed Type 1 56 1.1 (1) (8) Sealed Type 2 1.
Infrared Broiler Conversion IMPORTANT: The infrared broiler orifice must be changed from rear of range before unit is installed. Surface Burner Conversion Sealed Type 1 Locate bag labeled IR Broiler Orifice. Item #1 Remove nut securing 90 degree fitting and broiler tubing to rear of range. Item #2 Locate bag labeled Sealed Burner Orifice Type 1. Remove the venturi (Item #1) by turning counterclockwise. Remove Orifice from 90 degree fitting and replace with orifice from bag labeled IR Broiler Orifice.
Surface Burner Conversion Surface Burner Conversion Sealed Designer Range Type 2 & Rangetop Item #1 Item #1 Item #2 Item #2 Item #3 Item #3 Locate bag labeled Sealed Burner Orifice Type 2. NOTE: If the burner is a PowerPlus™ Burner (check control panel), use orifice kit 011915-000 to convert this burner only. DO NOT use this orifice for any other top burners. Remove the screws (Item #1) and set burner base aside (Item #2).
Orifice Locations Surface Burner Conversion Open Burner Type 3 (#61) (#65) (#57) (#67) DGRT301 (#63) (#65) Locate bag labeled Open Burner Orifice Type 3. Remove screws securing open surface burner to burner box and remove open surface burner. NOTE: Igniter wire must be disconnected to remove burner. (#57) Loosen air shutter screw and adjust opening to 7/16” and tighten air shutter screw. (#61) (#67) DGRT361 Locate orifice mounted onto gas valve behind control panel.
Griddle Conversion Griddle Conversion U-Shape Burner with Spark Ignition Straight Tube Burner with Spark Ignition (for models equipped with griddle) (for models equipped with griddle) Screw (Front of Burner) Air Shutter Air Shutter Set Screw Screw (Rear of Burner) Orifice Hood Locate bag labeled Griddle Orifice. Remove screws securing griddle venturi plate to griddle box and remove griddle venturi plate. Remove screws securing griddle burner to burner box.
Griddle Conversion Grill Conversion Straight Tube Burner with Glow Bar Ignition Lift flavor grids from unit. (for models equipped with griddle) Screw (Front of Burner) (for models equipped with grill) Lift flavor grid support from unit. Remove screws securing rear bracket to burner box. Remove screws securing flame shield to burner box. Lift out left and right side burner box liners. Screw (Rear of Burner) Remove screws securing burner to burner box.
Wok Conversion Bake Conversion (for models equipped with wok) “L” Shaped Overhead View Air Shutter Orifice Remove center trivet and/or grates, center ring and grate support. Lift and remove burner from unit. Loosen air shutter screw and adjust opening on burner to 5/8” and tighten air shutter screw. Remove orifice by turning counterclockwise and replace with orifice from bag labeled Wok Orifice. Remove oven racks and rack supports. Remove oven bottom by sliding toward rear of range, then lift upward.
Bake Conversion Rating Label Locations “U” Shaped When LP/Propane conversion is complete, complete the enclosed conversion label and place it next to the rating label. Air Shutter Air Shutter Set Screw The rating label locations can be found as follows: Professional Open Burner Range & Rangetop - On the interior left side of the burner box. To access this label, remove the left side grates and grate support. Orifice Hood Professional Sealed Burner Range & Rangetop - Under the control panel.