Installation Instructions

10
Leg Installation
1
1
1
2
3
2
3
4
Legs are packed in styrofoam top pack.
Note: Legs should be installed near to
where appliance is to be used, as they are
not secure for long transit.
Note: It is strongly recommended
that a pallet or lift jack be used rather than tilting.
Raise unit about a foot. Unscrew temporary legs
from couplings.
Screw legs into couplings on all
four corners.
Lower range gently to keep any undue
strain from legs and internal mounting
hardware.
Door Removal
1
step
2
3
4
Open door completely.
Fold latches backward until
locked in place.
Slowly close until latches stop
door.
Lift door up and out.