Installation Guide

18
4
Attach bracket with
mounting hardware provided.
Anti-tip Device Installation Wall Mount
1
Measurement (A)
Measurement (
A
)
Measurement (A)
Measurement (A)
Measurement (A)
+1
/4”
+1/4”
(.64 cm)
(.
64 cm)
Measurement (A)
+1
/4” (.64 cm)
22-1/4”
22
-1/4”
(56.5 cm)
(56.5 cm
)
22-1/4”
(56.5 cm)
2
Measure from floor to bottom
of the anit-tip opening located on the back of range.
This will be measurement (A).
Locate anti-tip bracket on rear wall with the top left corner at
measurement (A) plus 1/4” (.64 cm) from the floor and 22-1/4” (56.5
cm) from where the right side of range (facing range) is to be located.
3
Mark and drill holes where bracket will be located.
WARNING
TIPPING HAZARD
To reduce the risk of property
damage or personal injury;
install anti-tipping device
provided in accordance with
the installation instructions
in this document. Device
must be engaged properly to
prevent product from tipping
over.