installation

12
3
4
Mark and drill holes where bracket will
be located.
Attach bracket with
mounting hardware provided.
Anti-tip Device Installation - Wall Mount
TIPPING HAZARD
To reduce the risk of
property damage or
personal injury; install
anti-tipping at least one device provided in
accordance with the installation instructions
in this document. Device must be engaged
properly to prevent product from tipping
over.
WARNING
1
Measurement (A)
Mea
surement (
A
)
Measurement (A)
Measurement (A)
Mea
surement (A)
+1/4” (.64 cm)
+1
/4”
(.64 cm)
Measurement (A)
+ 1/
2” (1.3 cm)
B
2
Measure from  oor to bottom
of the anit-tip opening located
on the back of range. This will be
measurement (A).
Locate anti-tip bracket on rear wall with the top left
corner at measurement (A) plus 1/2” (1.3 cm) from the
 oor and (B - see chart) from where the right side of
range (facing range) is to be located.
B
30”
20-3/4”
(52.7 cm)
36”
22-3/4”
(57.8 cm)