Installation Instructions

Bake Conversion

“U” Shaped

Remove oven racks and rack supports.

Remove oven bottom.

Remove screws securing bake igniter to bake burner.

Remove screws securing bake burner shield to oven burner box.

Remove screws securing bake burner to oven burner box.

Loosen air shutter screw and adjust opening on burner to 3/8” and tighten air shutter screw.

Remove orifice by turning counterclockwise and replace with orifice from bag labeled Oven

Burner Orifice (U-Shape).

IMPORTANT: The orifice tip must be located 3/16” inside the burner for proper gas mixture

and combustion. The depth of the orifice can be adjusted by turning the orifice

counterclockwise (more depth) or clockwise (less depth).

Reverse procedure as needed to reassemble.

Vol

Air Shutter

Set Screw

Orifice

Hood

Air Shutter

Adjustment Screw