Installation Guide Countertop Side Trim Countertop Rear Trim
Installation (Side Trim) For Models: R24CSTSS - 24” D. VGIC Open Burner Ranges 1. Remove the outside grates and grate supports next to the counter. Grate support side trim (standard with product) 2. Locate and remove the screws holding the grate support side trim in place. Keep the screws for reuse. Heat shield (not on all products) 3. Lift the grate support side trim out. It will not be reinstalled. 4. Locate and remove the screws holding the heat shield in place. Keep the screws for reuse. 5.
Installation (Side Trim) For Models: P24CSTSS - 24” D. 5 Series VGCC/VGSC/VDSC/VESC/VISC Ranges and VGRT Rangetops 24” D. RDSCG/RDSCD/RDSCE D3 Ranges RD24CSTSS - 24” D. 3 Series RVGR/RVDR/RVER Ranges Place the countertop side trim template against the side of the range or rangetop. The flange of the template should be wrapped around the back of the unit. The top of the template should be even with the top edge of the outer trim. Mark the holes and remove template.
Installation (Rear Trim) For Models: P30CRTSS P36CRTSS P48CRTSS P60CRTSS - 5 Series 30” W. VGCC, VGSC, VDSC, VESC, VISC Ranges and 5 Series 30” W. VGRT Rangetops 3 Series 30” W. RVGR, RVDR, RVER Ranges 5 Series 36” W. VGCC, VGSC, VDSC Ranges and 5 Series 36” W. VGRT and VERT Rangetops 5 Series 48” W. VGCC, VGSC, VDSC Ranges and 5 Series 48” W. VGRT Rangetops 5 Series 60” W. VGCC and VDSC Ranges and 5 Series 60” W.
Installation (Rear Trim) Countertop rear trim and countertop side trim installed 5
Viking Range, LLC 111 Front Street Greenwood, Mississippi MS 38930 (662) 455-1200 For more product informations, visit our website at www.vikingrange.com in the US or brigade.