Use and Care Manual

13
E
Before operating your new oven make sure you read
and understand this Use and Care Manual completely.
Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display will
show
WELCOME TOUCH CLEAR
.
2. Touch the STOP/CLEAR pad.
:
will appear.
3. Set clock.
TO SET THE CLOCK
1. Touch TIMER/SETTINGS pad twice.
2. Enter the correct time of day by touching the numbers
in sequence. Touch START/+30 SEC pad.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time,
ERROR
will appear in the display. Touch the
STOP/CLEAR pad and re-enter the time.
If the electrical power supply to your oven should be
interrupted, the display will intermittently show
WELCOME
TOUCH CLEAR
after the power is reinstated. If this occurs
during cooking, the program will be erased. The time
of day will also be erased. Simply touch STOP/CLEAR
pad and reset the clock for the correct time of day.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
Before Operating