Care and Use

Warming Drawer Installation

(C)VQEWD5300SS

Typical Island Installaon ((C)VQEWD5300)

1) Provide a 10” x 28 ½” cutout to the front of the island.

2) Provide support beams using metal studs.

3) Pull the drawer out of the drawer casing to gain access on the

mounng holder at the front of the casing.

4) Insert the drawer casing into the island opening.

5) Secure the drawer casing with screws at the inside front top and

boom, using the pre-punched mounng holes.

6) Re-assemble the drawer secon into the drawer casing.

7) Apply weather proof sealant along the edges of the warmer.

8) Plug-in the warmer to a weather proof, and properly grounded,

electrical outlet.

9) If installing the unit directly under a grill, please allow 2-3/16"

between the grill cutout boom and the top of the warming

drawer cutout.

IMPORTANT

 Be sure that the warming drawer is properly grounded

and installed by a qualied technician. The electrical

cord has a 3 prong plug. Do not cut any of the prongs.

 Make sure that the island is free of cracks that would

allow water or other liquids to get into the electrical

controls.

 Keep the warming drawer away from water sprinklers.

 When not in use, cover the island to protect from rain

and harsh weather.

 If installing the unit directly under a grill, please allow

2-3/16" between the grill cutout boom and the top of

the warming drawer cutout.