manual and_installation_instructions

SIDE BURNER ACCESSORY CARE & USE/INSTALLATION
|
19
LOW HEAT FLAME ADJUSTMENT
The burners on your accessory feature an adjustable low
setting.
Fluctuations in gas pressure, gas conversion and even in the
quality of the gas itself may affect burner performance at
the “LOW” setting. It could be either too high or too low.
To adjust the burner for low setting:
1. Make sure the grill accessory is cool.
2. Remove the grates so that you can see the flame while
adjusting the burner.
3. Light the burner and set it to “LOW”. (all the way
counter- clockwise).
4. Pull off the control knob.
5. While holding the valve shaft with pliers, insert a thin
flat-blade screwdriver into the shaft and, while watching
the flame, adjust it to a minimum stable setting.
LIGHTING INSTRUCTIONS FOR ALL ACCESSORIES ...continued
Use a small screwdriver for low
setting burner adjustment.