Installation Instructions

16
Installation - Ranges
1
1
1
2
3
2 2
Legs are packed in cardboard top pack.
Note: Legs should be installed near to where
appliance is to be used, as they are
not secure for long transit.
Note: It is strongly recommended
that a pallet or lift jack be used rather than tilting.
Raise unit about a foot.
Unscrew shipping bolts from couplings
on all four corners .
4
Lower range gently to keep any undue strain from
legs and internal mounting hardware.
3
Screw legs into couplings on all four corners.
The 48” W. ranges have two additional legs located in the center
of the unit.
Leg Installation