User Manual

18
Operation
cook cycle pauses. At this point you can
check the food and adjust the settings.
There is a 1 minute window for response.
If you do not make adjustments, cooking
resumes and continues according to the
original settings.
a. To resume cooking with the original
settings, close the oven door, and tap
Continue Cooking, then Start.
b. To change the settings, select one of the
adjustment options: "Continue Cooking,"
"Cook less," "Brown less," "Cook & brown
less," and "Finished." For more information,
see page 28, "Making Adjustments
during a
Cook Cycle."
c. If your food item is done at the 80%
complete chime, remove it from the oven
and tap "Finished" to end the cook cycle.
Note: This step does NOT apply if the cooking cycle
is less than 3 minutes.
Note: You may open the oven door and check your
food at any point during the cook cycle. Pausing
the cook cycle by opening the door also allows you
to adjust the cook settings.
6. At the end of the cook cycle, a chime
sounds, notifying you that your item is
done. At this point, open the door to
check the food and, if needed, make an
adjustment. This option is available for 1
minute. The oven will continue to chime
every 3 seconds until either:
a. The door is opened
• When you open the door, or after 3
seconds, four adjustment options
appear on the touch screen: "Cook
more," "Brown more," "Cook & brown
more," or "Finished." You can select
one of these options. If you select the
cook and/or brown more options,
cooking resumes. If you select
"Finished," cooking stops.
b. A cooking adjustment is made or
c. After 1 minute has elapsed with no
activity.
• If no selection is made within 1
minute, the Repeat Cook menu will
display. If nothing is selected in the
Repeat Cook menu after 1 minute, the
oven will turn o and go back to the
Main Screen. This is a fail safe option
in the event that no one is available to
turn the oven o after the cook time
has completed.
7. Once cooking stops, remove the dish from
the oven.
The Speedcook Oven