Installation Instructions

12
Interior Adjustments
All 5 Series models feature side mounted rack supports with
19 adjustment positions.
All Beverage Centers ship with 2 wine racks and 2 Storage
bins - Remove and reposition as desired.
WINE RACK ADJUSTMENT
Wine Rack Removal
1. Fully extend empty rack
2. Firmly grasp both sides of rack and lift front end of rack
slightly (about ¼ ”) to center the pin in the slot
3. Pull rack towards you until all pins are clear of the slots.
If only repositioning the rack, do not remove completely
- go to “Rack Installation” Step 2.
4. Slightly tilt one side. Gently pull rack towards you to
remove rack from unit.
Note: Take care when removing rack to avoid scratching
interior of unit.
5. Once removed, retract the slides.
Note: The slides on the rack have a thin coating which is
used to block moisture and provide lubrication. Use care
when handling.
Wine Rack Installation
1. Insert empty rack into unit with one side tilted slightly
downward until back pin is between front and rear rail
supports.
2. Tilt rack back to horizontal and line up 2 back pins with
back slots.
3. Line up 2 back pins with 2 back slots and 2 front pins
with 2 front slots.
4. Continue inserting rack until all four pins are fully
inserted. Front of rack will set down slightly into the
front slots and be locked into position.
Center
the pins
Front Pin
Back Pin
Center
the pin
Operating Instructions