Installation Instructions

2
Table of Contents
Important Safety Instructions __________________________________________________________________________ 2
Dimensions _________________________________________________________________________________________ 3
Speci cations _______________________________________________________________________________________ 4
Cutout Dimensions___________________________________________________________________________________ 4
Electrical Requirements _______________________________________________________________________________ 5
General Information __________________________________________________________________________________ 5
Installation _________________________________________________________________________________________ 6
Final Preparation ____________________________________________________________________________________ 7
Service & Registration ________________________________________________________________________________ 7
Important Safety Instructions– Read and Follow!
Before beginning, please read these instructions completely and carefully.
WARNING
If the information in this manual is not followed exactly, a  re or explosion
may result causing property damage, personal injury or death.
DANGER
CAUTION
Hazards or unsafe practices which WILL result in
severe personal injury or death
Hazards or unsafe practices which COULD result in death or severe
personal injury
Hazards or unsafe practices which COULD result in minor personal
injury.
All safety messages will identify the hazard, tell you how
to reduce the chance of injury, and tell you what can happen if
the instructions are not followed.
• DO NOT remove permanently a xed labels, warnings, or plates from product. This may void the warranty.
• All local and national codes and ordinances must be observed. Installation must conform with local codes, or in the absence
of codes, the National Electrical Code, ANSI/NFPA-70 – latest edition.
• The installer must leave these instructions with the consumer who should retain for local inspector’s use and for future reference.
In Canada: Installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes.
WARNING
To reduce the risk of  re, electric shock, or injury to
persons, installation work and electrical wiring must
be done by quali ed people in accordance with all
applicable codes and standards, including  re-rated
conditions.
WARNING
ELECTRICAL SHOCK HAZARD
This appliance is equipped with a 3-prong power
cord with a grounding plug for your protection
against shock hazard and should be plugged
directly into a properly grounded receptacle.
Only use power cord supplied with the unit.
WARNING