User Guide

- 14 -
3.1.2 NVR with POE ( See Figure 3-2 )
Figure 3-2
The camera can work with Dahua POE NVR,Plug and Play, besides,the IP camera also supports
standard ONVIF protocol ,which can be added to third-party video recorder easily with ONVIF.
Note:
① Before connecting cameras to NVR that has POE switch ,make sure the NVR and
cameras have valid IP scheme that matchs each other.( e.g.: Hikvison NVR POE Port’s IP
Network Segment is 192.168.25.XX, so the camera IP must be 192.168.25.XX)
② Before connecting cameras to NVR that has no POE switch, make sure the NVR ,
cameras and the POE switch router have valid IP scheme that matchs each other.( e.g.: POE
switch router router’s IP is 192.168.1.1, so the camera IP must be 192.168.1.XX)
③ Some POE NVR models support plug and play(such as Dahua POE NVR), if the “Plug
& Play”feature is not available or not applicable, please add camera manually.
3.2 Dahua NVR Configuration
3.2.1 Dahua POE NVR Configuration, Plug and Play
Steps1:Just play and plug, connect cameras to NVR’s POE Ports, and then connect monitor
and NVR via VGA or HDMI ports, power for those devices.