System information

ULTRA PC PMP
26
www.myviliv.com
Setting Up BIOS
When setting up the password, the password must be entered when you turn on the computer or
execute the set-up. Therefore, the password must be set up very carefully.
Make sure to remember the password when you set up.
Setting up Booting Password
When setting or changing booting password, a keyboard is needed.
2. Setting up User Password
The use of user password is limited compared to supervisor password.
Depending on the user access level set up by supervisor, the change of items on the set up may be
impossible.
After entering Enter or OK on Change User Password item, proceed in the same way as described
in 3) of Setting up Supervisor Password.
3. Cancelling Password
1) Press Enter key on the password item to be deleted.
2) For ‘Enter New Password’, press Enter or OK key only without inputting any keys.
3) The password is cancelled with Password Uninstalled message.
1. Setting up Supervisor Password
When setting up supervisor password, no users except the
supervisor can use the computer.
1) Move to Security menu on the set-up.
2) Press Enter or OK key on Change Supervisor Password item.
3) For ‘Enter New Password’ prompt, enter the password and
press Enter or OK. Enter the password one more time, and
press Enter or OK.
※ For a password, 6 or less alphanumeric digits can be used,
but special letters cannot be used.
4) When ‘Password Installed’ appears, press Enter or OK.
Set-up is completed.
2
3