System information

ULTRA PC PMP
28
www.myviliv.com
1.ConrmationofS5Set-up(S5)
Execute[USBCClientUtility]onthescreentoconrmthemode
of Advance tab.
It must be set to RNDIS only.
※ Do not connect S5 to PC.
Description of Mode
- MSD(Mass Storage Device) and RNDIS
It operates by large-capacity storage device and network drive.
- RNDIS only
It operates as a network drive mode. (This mode is set when shipping from factory.)
2. Installation of Driver on Host PC
Install the driver by executing [ vilivConnect.exe ] on the host PC
to be connected.
※ This software can be downloaded from myviliv homepage
(www.myviliv.com).
※ Before installing the driver to host PC, do not connect to S5 terminal.
Connection of S5
Way to Connect S5
3. Execution of Connection Wizard
1) After installation, select [Yes] to execute Host Wizard.
2) Press [Next].
※ Before pressing [Next], make sure to connect
S5 terminal and PC.
 3)AfterconnectingS5terminal,conrmthatdevicedriveris
installed on PC automatically.
PC