Specification
■ Product Description:
-Floor and wall tiles are made of cement and composed of two layers: Wear layer or
colored layer and tile body.
■ Product Components:
A. Wear Layer or Color layer
3-5 mm thickness affixed to the tile body by 1,500-1,700 PSI mechanical
pressure. The layer is composed of:
□ White Portland Cement
□ Marble Dust
□ Silica Sand
□ Mineral Pigments for Color (i.e. Iron, Cobalt and Chromium Oxides)
B. Tile Body
10–13 mm in thickness, this part of the tile is composed of:
□ Gray Portland Cement
□ Sand
■ Standard Dimensions:
□ 200x200x16 mm (7-7/8” x 7-7/8”)
□ 1.35 kg/tile (2.98 lbs)
□ 25 tiles/m2 (2.32 tiles per sqf)
□ 33.75 kg/m2 (6.91 lbs/sqf)
■ Manufacturing Tolerance:
For 200x200x16 mm tile: (7-7/8” x 7-7/8” x 5/8')
□ Length/width: +/- 0.2 mm
□ Height: 0.5mm
■ Average Coefficient of Friction on Raw Tiles:
ASTM C1028-07 Standard Test Method for Determining Static Coefficient of Friction
□ Dry Surface = 0.89
□ Wet Surface = 0.65
■ ANSI A137.1 Dynamic Coefficient of Friction Test on Sealed Tiles:
□ Wet Surface = 0.44
*Tested on tiles with commercial grade sealant (JFB Hart HP300) by
TorTest Floor Friction Testing Service
Sotter Engineering Corporation Consultants
Technical Data
Villa Lagoon Tile - Cement Tile Data
Villa Lagoon Tile
www.VillaLagoonTile.com 1.251.968.3375 info@VillaLagoonTile.com