Technical data

5. The following window will pop up if you use IP Card update.

6. Choose the COM port where IP card is connected.

Note: The baudrate should be set to 57600 in case of IP card update. IP card update

through Ethernet is only possible through local network.

7. After clicking to Connect menu, then Load File menu you should select ip.ipx

firmware file for update.

8. Upgrade process can be started with Update button. Click To Disconnect button at

the end of update proccess.

9. Do not forget to send back the saved IP card settings at the end of the upgrade

(please check 4. System programming with PC software chapter).

10. To use new functions it might be required to get the latest EniTerm software with

the newest ET (setup) files – please download and use newest version.

Web browser menu of IP card can only be uploaded on the web browser site of IP card.

Upload is possible in Data Upload menu. If the web browser site cannot be uploaded

from any reason, you can use IP address then /mpfsupload command for data upload

(for example: 192.168.1.232/mpfsupload) of ip.bin file. Default upload password: 1234.