User manual

8. SYSTEM MESSAGES
System Message Code Description
AC ERROR 81 No main AC voltage
AC RESTORED 82 Main AC voltage restored
BATTERY LOW 83 No battery or low battery voltage level
BATTERY OK 84 Battery connected, battery voltage level OK
COM A ERROR 85 Communication error on COM A port
COM A RESTORED 86 Communication restored on COM A port
COM B ERROR 87 Communication error on COM B port
COM B RESTORED 88 Communication restored on COM B port
TCP/IP ERROR 89 For future usage
TCP/IP RESTORED 8A For future usage
IP LINK ERROR 8B Network cable unplugged
IP LINK ACTIVE 8C Network cable connection OK
PRINTER ERROR 8D Printer is off or no paper
PRINTER OK 8E Printer is ready to use
RECEIVER RESET 8F Receiver restarted
TIME/DATE SET 91 Receiver date and time was set
PROGRAM MODE 92 Programming through serial port
PROGRAM END 93 End of programming through serial port
REMOTE ACCESS 94 Programming through IP network
REMOTE END 95 End of programming through IP network
MANUAL ACK 96 Manual acknowledge of events in receiver
ACCESS GRANTED 97 Successful password usage in receiver menu
ACCESS DENIED 98 Incorrect password usage in receiver menu
RECEIVER TAMPER 99 Receiver tamper violation (if tamper is enabled)
REC. TAMP RESTORE 9A Receiver tamper restored (if tamper is enabled)
IP WAN ERROR 9B External WAN connection test failed
IP WAN RESTORE 9C External WAN connection test OK
EVENT OVERFLOW 9E Event buffer overflow at COM A port
EVENT OVERFLOW 9F Event buffer overflow at COM B port
IP ERROR 1692
There is no IP communication from the given client
account within the defined time range (comm. lost)
IP RESTORE 3692
IP communication restored for the given client
account where communication was lost
26