User manual

System Message Code Description
LINE CARD RESET E0 Line card restarted
TEL LINE ERROR 20 Telephone line error
TEL LINE OK 30 Telephone line restored
FAULT CALL 40 Received call error, no data receiving
FAULT DATA 10 Received data error, missing data
CANCEL CALL 50 Call abort by the user (hang up)
LINE CARD FAIL D0 Internal communication trouble with line card
System Message Code Description
DATAFILE MODIFY B1 IP receiver card web browser data file modified
SETTING MODIFY B2 IP receiver card settings changed
PROGRAM MODE B3
IP receiver card programming through serial port / IP
network
PROGRAM END B4
IP receiver card programming through serial port / IP
network end
COM ERROR B5
IP receiver card communication error on USB port
(with monitoring software)
COM RESTORED B6
IP receiver card communication restore on USB port
(with monitoring software)
TCP/IP ERROR B7 IP receiver card TCP/IP network error
TCP/IP RESTORED B8 IP receiver card TCP/IP network restored
TIME/DATE SET B9 IP receiver card date and time set
FIRMWARE UPDATE B0 IP receiver card firmware updated
LAN ERROR BB
IP receiver internal LAN connection (gateway) test
failed
LAN RESTORED BC IP receiver internal LAN connection (gateway) test OK
RECEIVER RESET BD IP receiver card restarted
IP WAN ERROR BE IP receiver external WAN connection test failed
IP WAN RESTORE BF IP receiver external WAN connection test OK
Note.: System messages are sent with 0000 client account (except IP ERROR / IP
RESTORE messages, which are sent with the given client account where IP
communication was lost).
27