User Guide

205
Motif creates the outbound route for you, and all SIP extensions
can now use this outbound route to make calls. The default
settings allow you dial US and Canada landlines using the 10-
digit phone number or a 1 followed by the 10-digit number.
FreePBX uses dialing patterns to specify how different styles of
phone numbers are handled. To check or change these:
1. In the FreePBX Administration panel, on the
Menu, point to Connectivity and then click
Outbound Routes.
2. On the right-hand side of the screen, under Add
Route, click the route that was created for you.
3. Adjust settings under Dial Patterns that will use
this Route.
Routing the Incoming Calls
To receive the incoming calls from your Google Voice number,
you need to direct them somewhere. FreePBX has a lot of
features that work with incoming calls, but this guide only covers
directing calls to a specific extension. To route calls to an
extension:
1. In the FreePBX Administration panel, on the
Menu, point to Connectivity and then click
Inbound Routes.
2. In the Description box, type a name for this rule.
For example, Google Voice.
3. If you want to create a rule that only applies to
incoming calls from one specific Google Voice
account: in the DID Number box, type the phone
number that Google Voice gave you.
4. In the == choose one == list, click Extensions and
then click the extension that you want to connect
the incoming calls to.
5. Click Submit.
6. At the top of the page, click Apply Config.