User Manual

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Page 14
Storage Requirements
 SD card up to 64 GB, or
 VimBox (either 1 TB or 2 TB version)
Package Contents
There are slight variations in what is shipped with each camera or
VimBox. A basic package will contain the following:
 The device
 Ethernet cable
 Ethernet adaptor, relevant for models: EagleCam (P1) and PearlCam
(M1)
 Power adapter
 Stand and installation kit (where applicable)
 Wireless antenna, relevant for models: VT-361 and SeaCam (B1)
 Warranty card
 Getting Started card (containing a download link for manual)
Note: Always make sure you are using the correct voltage power supply
for your device. Failure to use the correct voltage power supply could
result in equipment damage and invalidate your warranty.
Connecting the Device
Access to the camera is accomplished with an Ethernet or Wi-Fi
connection:
ETHERNET: If you plan to use the device through a wired connection, you
simply connect an Ethernet cable from the Ethernet interface to your
router. The device will then show up on your network. You can go to the