User Manual

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Page 44
Schedule Recording Times
Under the Schedule Recording tab, you have the ability to enable
recordings based on two different options: 24/7 and Scheduled. You
should enable one of these options if you wish to schedule recording
times automatically.
 24/7 - You will be recording around the clock.
 A Scheduled Recording gives you control over the times that you
actually record by scheduling a specific times. You will be able to
schedule up to four different recording sessions.
For each schedule, you can set a beginning time and an ending time, and
specify the days of the week. The system uses a 24-hour clock, in
sequential order up to 23:59. This means, that if you want to record from
midnight to 5:00 AM, for example, you would enter 00:01 as the start
time and 05:00 as the end time. If you want to record from noon to 5:00
PM, you would enter 12:00 to 17:00. However, if you wish to record from
20:00 to 3:00 (8:00 PM to 3:00 AM), you will need to specify two
schedules:
 From 20:00 to 23:59
 From 00:01 to 3:00
Note that it is possible to specify in increments of one minute, such that
you can also record from 13:15 to 18:43. Once you have configured all
of your schedules, click Apply.