Datasheet

15 Min.
19 Min.
L ± 1.5
W ± 1.0
Ød ±0.1
6.0V – 2.5F 2 SERIAL MODULE
FEATURES
2 units serially connected to provide 6.0V products
Lead terminal type
2-Pin terminal type according to customer’s requirement
Drawing
I TYPE
15 Min.
19 Min.
L ± 1.5
W ± 1.0
Ød ±0.1
D +0.1Max.
P ± 0.2
(-)Negative polarity
(+)Positive polarity
O TYPE
TYPE I O H
P 5.
5 15.5 10.5
D = 10.5mm
D +0.1Max.
P ± 0.2
(-)Negative polarity
(+)Positive polarity
15 Min.
19 Min.
L ± 1.5
W ± 1.0
Ød ±0.1
H TYPE
D +0.1Max.
P ± 0.2
(+)Positive polarity
Part Number
Ra
ted
Voltage
(V)
Capacitance
(F)
ESR (mΩ)
Max.
Current
(A)
Leakage
Current
(
㎃
, 7
2hr)
Size (
㎜
)
Wei
ght
(g)
Volume
(
㎖
)
AC(1
㎑
)
DC D
×
W
×
L
VEC6R0255QG 6.0 2.5 135 205 5.0 0.015 10.5×21×22.5 4.7 4.4
* Max. Current : 1 sec. discharge to 1/2V
R
* When do module more than 2 series, please fully discharge over 1 hour first, then assemble right after within 1 hour.
SPECIFICATION
D +0.1Max.
(-)Negative polarity
ITEM CH
ARACTERISTICS
Rated Voltage (V
R
) 6.0 V
Operating Temperature
-40 ~ +65℃
Capacitance Tolerance -10 ~ +30%
High Temp.
Load Life
(65℃)
Measure
After 1,000 hours at V
R
loaded under +65℃, c
apacitors meet the following criteria.
Cap. Change ≤ 30% of initial value
ESR Change 2 time of specified value
High Temp.
Load Life
(85℃)
Measure
After 1,000 hours at 4.8V loaded under +85℃,capacitors meet the following criteria.
Cap. Change ≤ 30% of initial value
ESR Change 2 times of specified value
Cycle Life
Characteristics
Cycle 500,000
Cap. Change ≤ 30% of initial value
ESR Change 100% increase from specified value
Condition Cycle of Charge/discharge from V
R
to 1/2V
R
Shelf Life
2 y
ears
No Electrical Charge, Temperature Below 70℃
(∆C : ≤10% of initial value / ∆ESR : ≤ 50% of initial value)
approved by: amec GmbH
www.amec-gmbh.de
[e-mail]
Phone: [phone]