Specifications

ManualsBrandsVINCENT Manualsaudio & home theatreCD-S2

Vincent

Operation Button(s) Description

Start and pause

playback

(6)(23)

PLAY/

PAUSE

This button, both on the front of the device and on the remote control, starts

playing the inserted CD and the symbol “ “ appears on the display (2)

during play. If there is no CD inserted, “NO DISC” appears in the display

and pressing the button has no effect. If the button is pressed again while a

CD is playing, play will be interrupted at the current position. This “PAUSE”

mode is indicated in the display (2) by the symbol “ ”. During the pause

the disc continues to rotate and when the button is pressed play continues

from this position. The “PAUSE” function should only be used for brief inter-

ruptions.

Direct selection

of a track

Number

keys (19)

You can start playing a track at any time by keying in the track number on

the remote control. For numbers over 10, you must press the “+10” button

as often as necessary until it shows the relevant first figure of the number

and then you key in the second figure. If there is no track of the keyed-in

number on the CD, the player switches to “STOP” mode. If the player is

paused, you cannot select any other track directly with the number buttons.

Stop playback

(5)(25)

STOP

While a CD is being played, pressing this button stops the playing. If the play-

er was in “PAUSE” mode, this mode will also be ended by pressing the

“STOP” button. The total number of tracks on the CD and the total playing time

appear in the display (2) again. This button is on both the front of the device

and the remote control.

Skip to the

following track

(9)(32)

When this button is pressed while the CD is playing, the current track stops

playing and the next track in the sequence begins to play. If this button is

pressed in “STOP” mode, you can choose all the CD tracks one after the

other starting from track 02. Playback can then be started again with the

“PLAY/PAUSE” button (6)(23). With the “CANCEL” button (28) the player

goes back to “STOP” mode. The button is located both on the front of the

device and on the remote control.

Skip to playback

the previous track

(8)(31)

BACK

If this button is pressed once while the CD is playing, the current track stops

and the actual track starts playing from the start again. Further presses skip

to playing the previous tracks in reverse playing sequence. If this button is

pressed in the “STOP” mode, you can choose all the CD tracks in reverse

order starting with the last track. Playback can then be started again with

the “PLAY/PAUSE” button (6)(23). With the “CANCEL” button (28) the

player goes back to “STOP” mode. The button is located both on the front

of the device and on the remote control.

PLAYBACK FUNCTIONS

OPERATING THE APPLIANCE