Specifications

38 Vincent
OPERATING THE APPLIANCE
ADVANCED PLAYBACK FUNCTIONS
Operation Button(s) Description
Delete the selected
playing sequence
CANCEL (28)
This button deletes a program set up with the “PGM” function (29). If no pro-
gram has been set up, then this button has no function. If the button is pressed
during a pause, any selected program will be deleted and you can continue
to play the current track and the remaining CD tracks with “PLAY/PAUSE”
(6)(23). Just as with the program set-up, this action may only be performed
with the remote control.
Switch between normal
and random playback
RANDOM (30)
The function activated with this remote control button ensures that all the CD
tracks are played in random order. This function cannot be used for playing a
program set up with “PGM” (29). If this button is pressed during play or
pause, the current track is stopped and the playing of all the CD tracks in ran-
dom order begins. In the display, this play mode will be indicated by the text
“RAN”. Pressing the “RANDOM” button again switches off random playing
and playing will continue from the current position.
Switch between playing
the content of the CD
once, repeating an indi-
vidual track and repea-
ting all the tracks on
the CD
REPEAT
(4)(22)
If this button is pressed once while the CD is playing, the current track will be
played over and over again when it has finished. In the display (2) this ope-
ration mode is indicated by the text “REPEAT 1”. If this button is pressed twice
while the CD was playing, then the entire CD or the entire program will be
played over and over again when it has finished. In the display (10) this ope-
ration mode is indicated by the text “REPEAT ALL”. A third press of the key
switches this function off. The desired repeat mode can also be switched on
even when play is stopped or for a selected program. The “REPEAT” button is
to be found on the front panel as well as on the remote control.
Repeat a custom section
of the track as an
endless loop
A-B (20)
While the CD is playing, the first press of this key marks the start of the
section (A) and the second press marks the end of this section (B). As soon
as both points are selected, the player continues to play the marked
extract over and over again until the “A-B” key is pressed again or
“STOP” (5)(25) is pressed. In the display (2) this play mode is indicated
with the symbol “A
 B”. After the A-B playback has been stopped with
the “STOP” key (5)(25), the marked points will be deleted. This play opti-
on too can only be controlled via the remote control.
Play a short introduction
of every track
INTRO (21)
You can press this remote control key if the beginning of every track is only to
be played for a brief time. In this mode the first ten seconds of the track will
be played then it will skip to the next track in the sequence. This function is
also known by the term “Intro Scan“. Even if a program has been set up for
the play sequence (29), all the CD tracks will each be played once for a
brief time after the “INTRO” key has been pressed. Pressing this key again
ends the Intro Mode and continues playing the remaining section from the
current position onwards. The text “INTRO” will be shown on the display (2)
while the “Intro Scan” is active. If this key is pressed during play or pause, the
Intro Mode always starts with the first CD track.