Specifications

Vincent

10. ANALOG OUTPUT:

analogue audio signal output

This pair of RCA connectors is to be connected to

the relevant input of the amplifier, preamplifier

etc. It is not necessary to also connect the digital

signal output (11).

11. DIGITAL OUTPUT: coaxial signal output

If the amplifier, receiver or preamplifier is equip-

ped with a digital coaxial connector, this CD play-

er signal output may be connected to it. It is not

necessary to connect an analogue (10) and a

digital signal output (11) at the same time.

12. POWER CONTROL (12V): ON/OFF control

These jack connectors (3.5 mm) receive and for-

ward the signal for the standby control (12V

Trigger).

13. FUSE: Fuse holder

This small plastic housing holds the fuse. Refer to

the security precautions.

14. AC: Power Connector

To establish the power supply, connect the plugs

of the power cable to the device and to a suitab-

le wall outlet.

REAR VIEW

10 11 12 13 14