Specifications

Vincent

OPERATING THE APPLIANCE

Operation Button(s) Description

Switch off tone control

(BASS/TREBLE)

TONE (4)

If the sound is not to be changed, it is recommended that you switch off

the sound control (BASS, TREBLE) with this button on the front of the devi-

ce. When this button is pressed, the sound processing settings in the tone

controllers (1)(3) come into play. If the button is not pressed, the two

sound controllers in the preamplifier are bypassed and the signals from the

source are not changed in terms of their frequency levels.

Switch the audio signal

correction for low volu-

me on and off

LOUD (6)

This function is operated from the front panel. It is a feature of audio ampli-

fiers that permits the user to strengthen low and high frequencies compa-

red with middle frequencies at the touch of a button. It thereby corrects the

impression of volume at low volume. In an audio system, when the volume

is small, low and high frequency ranges are insufficient because of the

characteristic of human auditory sensation. This function should only be

used at low volume. It has no effect on the signal of the output “OUTPUT

REC” (11).

Change the brightness

of the tube window illu-

mination

DIMMER (17)

The display window for the visible tube (5) can be illuminated with one of

four brightness settings, if that is desired. Initially the brightness setting is at

maximum. By repeatedly pressing “DIMMER” all illumination levels are

available. After switching off the preamplifier the brightness setting is

saved until you use the device again.